Users Guide
Table Of Contents
- OpenManage Network Integration for SmartFabric Services User Guide Release 2.1
- Contents
- About this guide
- Change history
- Overview of OMNI, SFS, VxRail, and PowerEdge MX
- OpenManage Network Integration
- OMNI vCenter integration
- Access the OMNI stand-alone portal
- Access the OMNI Fabric Management Portal
- OMNI Appliance Management user interface
- SmartFabric management with OMNI
- OMNI feature support matrix
- View SmartFabric instance overview
- View fabric topology
- Manage switches in a fabric
- SmartFabric bulk configuration
- Configure server interface profile
- Configure and manage uplinks
- Configure networks and routing configuration
- Configure global settings for SmartFabric
- View fabric events and compliance status
- OMNI automation support for PowerEdge MX SmartFabric
- OMNI automation support for NSX-T
- Lifecycle management
- Troubleshooting
- Troubleshooting tools
- Unable to add SmartFabric instance in OMNI
- Missing networks on server interfaces
- Unable to launch OMNI UI
- OMNI plug-in does not show service instance
- Unable to register the vCenter in OMNI
- OMNI is unable to communicate with other devices
- Timestamp not synchronized in OMNI
- Reset OMNI VM password
2. Select the switch, then click Add.
3. The system displays the route to switch addition success message.
View eBGP peer details
The eBGP peer details display a list of mapped routes. Select an eBGP route to view details pertaining to that specific route
including the switch ID.
Delete eBGP route from switch
1. Select an eBGP route, then click Delete Route.
2. Click Delete to remove the route from the switch. The system displays route deletion success message.
Configure global settings for SmartFabric
Starting from 2.0 release, you can configure SmartFabric switch services settings using OMNI UI.
You can configure the following services on the SmartFabric switches using OMNI:
● NTP
● DNS
● Syslog
120
SmartFabric management with OMNI