Users Guide
Table Of Contents
- OpenManage Network Integration for SmartFabric Services User Guide Release 2.1
- Contents
- About this guide
- Change history
- Overview of OMNI, SFS, VxRail, and PowerEdge MX
- OpenManage Network Integration
- OMNI vCenter integration
- Access the OMNI stand-alone portal
- Access the OMNI Fabric Management Portal
- OMNI Appliance Management user interface
- SmartFabric management with OMNI
- OMNI feature support matrix
- View SmartFabric instance overview
- View fabric topology
- Manage switches in a fabric
- SmartFabric bulk configuration
- Configure server interface profile
- Configure and manage uplinks
- Configure networks and routing configuration
- Configure global settings for SmartFabric
- View fabric events and compliance status
- OMNI automation support for PowerEdge MX SmartFabric
- OMNI automation support for NSX-T
- Lifecycle management
- Troubleshooting
- Troubleshooting tools
- Unable to add SmartFabric instance in OMNI
- Missing networks on server interfaces
- Unable to launch OMNI UI
- OMNI plug-in does not show service instance
- Unable to register the vCenter in OMNI
- OMNI is unable to communicate with other devices
- Timestamp not synchronized in OMNI
- Reset OMNI VM password
● SNMP
NOTE: This feature is supported from SmartFabric OS10.5.2.2 and later versions, and applicable for SFS L3 leaf and spine
personality.
Configure NTP server
To configure an NTP server:
1. Select the SmartFabric instance > Global Settings > NTP. The page displays the list of the NTP servers that are already
configured in the OMNI VM.
2. Click Add to configure an NTP server.
3. Enter the IP address or hostname of the NTP server and click Add.
The system displays the configuration success message.
To delete an NTP server, select an entry from the list and click Delete.
Configure DNS server
To configure one or more DNS servers:
1. Select the SmartFabric instance > Global Settings > DNS. The page displays the list of the DNS servers that are already
configured in the OMNI VM.
2. Click Add to configure one or more DNS servers.
3. Enter the IP address of the DNS server to configure a single DNS server setting. You can use the + button to add more DNS
servers.
4. Click Add.
SmartFabric management with OMNI
121