Users Guide
Table Of Contents
- OpenManage Network Integration for SmartFabric Services User Guide Release 2.1
- Contents
- About this guide
- Change history
- Overview of OMNI, SFS, VxRail, and PowerEdge MX
- OpenManage Network Integration
- OMNI vCenter integration
- Access the OMNI stand-alone portal
- Access the OMNI Fabric Management Portal
- OMNI Appliance Management user interface
- SmartFabric management with OMNI
- OMNI feature support matrix
- View SmartFabric instance overview
- View fabric topology
- Manage switches in a fabric
- SmartFabric bulk configuration
- Configure server interface profile
- Configure and manage uplinks
- Configure networks and routing configuration
- Configure global settings for SmartFabric
- View fabric events and compliance status
- OMNI automation support for PowerEdge MX SmartFabric
- OMNI automation support for NSX-T
- Lifecycle management
- Troubleshooting
- Troubleshooting tools
- Unable to add SmartFabric instance in OMNI
- Missing networks on server interfaces
- Unable to launch OMNI UI
- OMNI plug-in does not show service instance
- Unable to register the vCenter in OMNI
- OMNI is unable to communicate with other devices
- Timestamp not synchronized in OMNI
- Reset OMNI VM password
2. Select Edit a connection, then click OK.
CAUTION: Edit a connection menu displays edit option of Bridge interface docker0 and Veth interfaces,
apart from ens160 and ens192. Do not modify any configuration of the docker0 or Veth interfaces as it can
lead to OMNI appliance failure or unexpected OMNI behavior.
3. Select Wired connection 1, then click Edit.
4. Verify Ethernet (ens160) is connected to the vCenter reachable
network, then change the Profile name to vCenter Server Network.
5. Change the IPv4 configuration from Automatic to Manual from the drop-down.
OpenManage Network Integration
23