Users Guide
Table Of Contents
- OpenManage Network Integration for SmartFabric Services User Guide Release 2.1
- Contents
- About this guide
- Change history
- Overview of OMNI, SFS, VxRail, and PowerEdge MX
- OpenManage Network Integration
- OMNI vCenter integration
- Access the OMNI stand-alone portal
- Access the OMNI Fabric Management Portal
- OMNI Appliance Management user interface
- SmartFabric management with OMNI
- OMNI feature support matrix
- View SmartFabric instance overview
- View fabric topology
- Manage switches in a fabric
- SmartFabric bulk configuration
- Configure server interface profile
- Configure and manage uplinks
- Configure networks and routing configuration
- Configure global settings for SmartFabric
- View fabric events and compliance status
- OMNI automation support for PowerEdge MX SmartFabric
- OMNI automation support for NSX-T
- Lifecycle management
- Troubleshooting
- Troubleshooting tools
- Unable to add SmartFabric instance in OMNI
- Missing networks on server interfaces
- Unable to launch OMNI UI
- OMNI plug-in does not show service instance
- Unable to register the vCenter in OMNI
- OMNI is unable to communicate with other devices
- Timestamp not synchronized in OMNI
- Reset OMNI VM password
NOTE: SFS events feature is supported from SmartFabric OS10 version 10.5.2.2 and later.
The system displays SmartFabric instance configuration success message.
Add SmartFabric instance
This information describes how to add SmartFabric instances in OMNI. You can add up to 15 SmartFabric instance in a single
OMNI VM.
Prerequisite
Identify the master IP address of the switch in a SmartFabric cluster. To identify the master, use the show smartfabric
cluster command in the OS10 switch CLI.
OS10# show smartfabric cluster
----------------------------------------------------------
CLUSTER DOMAIN ID : 100
VIP : fde2:53ba:e9a0:cccc:0:5eff:fe00:1100
ROLE : MASTER
SERVICE-TAG : FX6HXC2
MASTER-IPV4 : 10.11.180.8
PREFERRED-MASTER : true
----------------------------------------------------------
Use the following steps to add SmartFabric instance:
1. Log in to OMNI Fabric Management portal.
2. Click OMNI Home > SmartFabric
3. Click Create to manually add the master IP address of the SmartFabric instance.
4. Enter the SmartFabric instance IP address, SmartFabric name, username, and password.
5. (Optional) Select Register for SFS events checkbox to retrieve the SFS events and display through OMNI.
6. Click Add.
Access the OMNI stand-alone portal
51