Users Guide
Table Of Contents
- OpenManage Network Integration for SmartFabric Services User Guide Release 2.1
- Contents
- About this guide
- Change history
- Overview of OMNI, SFS, VxRail, and PowerEdge MX
- OpenManage Network Integration
- OMNI vCenter integration
- Access the OMNI stand-alone portal
- Access the OMNI Fabric Management Portal
- OMNI Appliance Management user interface
- SmartFabric management with OMNI
- OMNI feature support matrix
- View SmartFabric instance overview
- View fabric topology
- Manage switches in a fabric
- SmartFabric bulk configuration
- Configure server interface profile
- Configure and manage uplinks
- Configure networks and routing configuration
- Configure global settings for SmartFabric
- View fabric events and compliance status
- OMNI automation support for PowerEdge MX SmartFabric
- OMNI automation support for NSX-T
- Lifecycle management
- Troubleshooting
- Troubleshooting tools
- Unable to add SmartFabric instance in OMNI
- Missing networks on server interfaces
- Unable to launch OMNI UI
- OMNI plug-in does not show service instance
- Unable to register the vCenter in OMNI
- OMNI is unable to communicate with other devices
- Timestamp not synchronized in OMNI
- Reset OMNI VM password
Table 14. VLAN Networks tab
Field Description
NetworkId Enter the network ID for a L2 or L3 VLAN network. This ID
must be unique. For example, network-500
NetworkName Enter the name of the L2 or L3 VLAN network.
Description Enter the description of the L2 or L3 VLAN network. This is an
optional field.
VLAN Enter the VLAN ID for the L2 or L3 VLAN network. The VLAN
number can range from 1—3999 (excluding 3939).
IPAddressList Enter the IP address for the L3 VLAN network separated by
comma.
PrefixLen Enter the prefix length for the IP address.
GateWayIpAddress Enter the gateway IP address.
HelperAddress Enter the helper IP address.
VxLAN Networks tab—Displays the template to configure L2 and L3 VXLAN networks in bulk. The tab also has sample
configuration details.
Table 15. VxLAN Networks tab
Field Description
VirtualNetworkName Enter the network ID for a L2 VXLAN networks. This ID must
be unique.
Description Enter the name of the L2 VXLAN networks.
VltVlanid Enter the VLT VLAN ID for the L2 VXLAN network. The VLAN
number can range from 1—3999 (excluding 3939).
VxlanVni Enter the VXLAN network identifier (VNI) for the network.
The VLAN ID and VNI number must be same.
IPAddressList Enter the IP address for the L3 VXLAN network separated by
comma.
PrefixLen Enter the prefix length for the IP address for the L3 VXLAN
network.
GateWayIpAddress Enter the gateway IP address for the L3 VXLAN network.
HelperAddress Enter the helper IP address for the L3 VXLAN network.
ServerInterface tab—Displays the template to configure server profiles and server interface profiles in bulk. The tab also has
sample configuration details.
Table 16. Server profiles tab
Field Description
InterfaceId Enter the server interface ID for the server interface
profile. The value must be a unique string. Dell Technologies
recommends using the MAC address of the onboarded server
interface without ":". For example, bc97e1c9f980.
NICBonded Enter the NIC bonding state. This field indicates whether the
interface is to be configured for LACP. You can enter two
values True or False. For VxRail nodes, this field should
always be set to False.
ServerId Enter the profile ID for the server profile. This is the
server profile name. Use the same name for all VxRail nodes
connected to the SmartFabric.
SmartFabric management with OMNI 77