Users Guide

Table 16. Server profiles tab (continued)
Field Description
BondingTechnology Enter the bonding technology. You can enter two values
AutoDetect or LACP. For VxRail nodes, you must always
set to Autodetect.
UntaggedNetwork Enter the network ID that must be untagged to the server
interface profile.
Networks Enter the network ID that must be tagged to the server
interface profile separated by comma.
Static Routes tab—Displays the template to configure static routes in bulk. The tab also has sample configuration details.
Table 17. Static Routes tab
Field Description
PolicyId Enter the static route policy ID. This is a unique value. For
example, static_1.
Name Enter the static routing policy name.
Description Enter the description detail for the static route policy.
Ipv4AddressPrefix Enter the IPv4 network address for the static route policy.
Ipv4PrefixLen Enter the prefix length for the network address.
Ipv4NextHopIp Enter the IP address of the next hop.
NodeId Enter the node ID, which is the service tag number of the
switch separated by comma. Validate the service tag before
adding as the system does not validate the NodeId.
eBGP Peer Configuration tab—Displays the template to configure static routes in bulk. The tab also has sample configuration
details.
Table 18. eBGP Peer configuration tab
Field Description
PolicyId Enter the static route policy ID. This is a unique value. For
example, 1a-tier0-1.
Description Enter the description detail for the eBGP peer policy.
PeerInterfaceIPAddress Enter the IPv4 network address for the eBGP peer policy.
PeerASN Enter the peer ASN number.
NodeId Enter the node ID, which is the service tag number of the
switch separated by comma.
Upload and apply the bulk configuration template
Upload the completed template to apply the configurations to the SmartFabric instance.
1. Click the SmartFabric instance > Bulk Configuration.
2. Click Skip to go to the next step.
78
SmartFabric management with OMNI