Users Guide
Table Of Contents
- OpenManage Network Integration for SmartFabric Services User Guide Release 2.1
- Contents
- About this guide
- Change history
- Overview of OMNI, SFS, VxRail, and PowerEdge MX
- OpenManage Network Integration
- OMNI vCenter integration
- Access the OMNI stand-alone portal
- Access the OMNI Fabric Management Portal
- OMNI Appliance Management user interface
- SmartFabric management with OMNI
- OMNI feature support matrix
- View SmartFabric instance overview
- View fabric topology
- Manage switches in a fabric
- SmartFabric bulk configuration
- Configure server interface profile
- Configure and manage uplinks
- Configure networks and routing configuration
- Configure global settings for SmartFabric
- View fabric events and compliance status
- OMNI automation support for PowerEdge MX SmartFabric
- OMNI automation support for NSX-T
- Lifecycle management
- Troubleshooting
- Troubleshooting tools
- Unable to add SmartFabric instance in OMNI
- Missing networks on server interfaces
- Unable to launch OMNI UI
- OMNI plug-in does not show service instance
- Unable to register the vCenter in OMNI
- OMNI is unable to communicate with other devices
- Timestamp not synchronized in OMNI
- Reset OMNI VM password
5. (Optional) Click Create Network to associate a network with the uplink.
Enter the name of the network, optional description, and the VLAN number.
6. Click Finish to complete the L2 uplink creation.
The system displays user uplink creation success message.
Create L3 Uplink
Create an L3 uplink of L3 VLAN or L3 routed interface types.
Create L3 VLAN uplink
1. Select the SmartFabric instance > Uplink, and click Create.
2. Select L3 for the uplink port type, select L3 VLAN, enter the name for the uplink, and optional description, then click Next.
98
SmartFabric management with OMNI