Deployment Guide

8. Select the VSAN datastore for the configuration and disk files, then click Next.
9. Select a destination network for each network source, then click Next. The VxRail Management Network must be assigned to the
VxRail internal Management network. The default VLAN ID for this network is 3939. The vCenter Server network must be
connected to the port group where the vCenter Server is reachable for deployment of the OMNI plug-in. If you are using a
standalone generic ESXi host deployment, you can skip this step.
10. Click Finish to start creation of the VM.
OpenManage Network Integration
15