Deployment Guide

3. The Service Interface Profile successfully updated; close the message.

Delete profile

1. Select the Server Interface Profile from the display, then click Delete.

2. Click Delete to confirm removal of the Server Interface Profile.

Uplink

This information describes how to create, edit, or delete fabric uplinks. You can create uplinks on each fabric with available interfaces

which are not part of an existing uplink, server connected ports, or part of a SmartFabric automation and jump port.

There are two types of uplinks — L2 and L3, and there are two types of L3 uplinks — L3 VLAN and L3 routed interface. Once you have

created an uplink, you can then associate networks to the uplink and change or modify interfaces. These user-managed uplinks require

configuration of networks through SmartFabric vCenter.

OMNI SmartFabric management