Deployment Guide

NOTE: If you delete an uplink, any unused networks and ports will be available for future use.

L2 uplinks

1. Select the Service Instance, then select Uplink.

Create user uplinks

You can create an uplink by selecting the fabric with a unique user-given name, then select the interfaces and networks through the

wizard interface to create a user uplink.

1. Select Uplink, then click Create.

2. Enter the Uplink Name, an optional description, then click Next.

3. Select the rack to create the uplink on, select the interfaces, the LAG mode (LACP or Static), then click Next.

OMNI SmartFabric management