Deployment Guide

4. (Optional) Delete the OMNI 1.1 VM, if needed.

Upgrade SmartFabric OS in switch

This information describes how to upload an image to upgrade the fabric. For information about changing the SmartFabric password,

upgrading the OS or replacing the switch, see Summary.

NOTE: Fabric upgrade must be performed during OMNI maintenance mode (see OMNI maintenance mode).

Upload image

1. Select Service Instance > Summary > Fabric Actions > Upgrade OS.

2. Click Upload to upload the .bin file.

Upgrade fabric

1. Select the .bin image, then click Upgrade Fabric.

Network fabric management