Deployment Guide

OMNI support

This information describes how to access the OMNI support. Select Support to view the support options.

OMNI maintenance mode

Enable Maintenance Mode

NOTE: It is recommended to enable Maintenance Mode before upgrading the network fabric.

Enabling Maintenance Mode disables zero-touch automation for all SmartFabric instances. Enabling Maintenance Mode prevents OMNI

from configuring networks on SmartFabrics when there are changes in the vCenter port groups.

1. Click Support > Enable Maintenance Mode.

2. Click Enable Maintenance Mode to confirm.

3. Maintenance Mode enabled; close the message.

Disable Maintenance Mode

Disabling Maintenance Mode restarts zero-touch automation for all SmartFabric instances. OMNI begins to create networks on the

SmartFabric instances based on the port groups in the vCenter.

1. Click Support > Disable Maintenance Mode.

2. Click Disable Maintenance Mode to confirm.

OMNI support 75