Deployment Guide

NTP server status

1. Select 2. Interface Configuration Menu.

2. Select 4. Show NTP Status.

3. Enter the Validate NTP Server IP address/host name.

UI is not populated

NOTE:

If any IP address or SSL certificate changes on the SmartFabric VM, OMNI automation services can be restarted

by enabling Maintenance mode, then disabling Maintenance mode (see OMNI support).

Check the service status on the plug-in VM.

1. Select 4. Restart SmartFabric Management Service.

2. Select 2. Status SmartFabric Management Service to list the registered vCenter and SmartFabric OMNI the VM is managing.

Confirm that all services are active.

Create support bundle

NOTE: We recommend using OpenManage Network Integration > Home > Support > Update OMNI Log to Debug option.

1. Select 4. SmartFabric Management Service Menu.

Troubleshooting