Deployment Guide

2. Select 5. Create Support Bundle to create a support bundle at /tmp/support-bundle.tar.gz on the SmartFabric OMNI VM.

3. From an external host, scp using admin to transfer the support bundle file out. SCP credentials for the SmartFabric appliance are the

same as the SmartFabric appliance console password. By default, the username and password is admin/admin.

NOTE: Recommendation is to set the log level change to DEBUG before creating the support bundle.

Change log level

NOTE: We recommend using OpenManage Network Integration > Home > Support > Update OMNI Log to Debug option.

1. Select 4. SmartFabric Management Service menu.

2. Select 6. Change Application Log Level to display the current log level and switch accordingly.

NOTE:

By default, the SmartFabric appliance comes with a log-level of ERROR. The appliance log can be swapped

between ERROR to DEBUG, or the opposite way.

3. Stop if the log level is already on the wanted log level.

Reset SmartFabric VM password

1. Reboot the VM from vCenter, then select Advanced Options for Debian GNU/Linux.

Troubleshooting