Administrator Guide

Dell EMC Networking CLI 125
role priority Configures the priority value used on a
switch for primary/secondary role selection.
MD
show vpc Displays information about an MLAG. PE
show vpc brief Displays the MLAG global status. PE
show vpc consistency-
parameters
Displays MLAG-related configuration
information in a format suitable for
comparison with the other MLAG peer.
PE
show vpc consistency-
features
Displays MLAG-related configuration
information in a format suitable for
comparison with the other MLAG peer.
PE
show vpc peer-keepalive Displays the peer MLAG switch’s IP address
used by the dual control plane detection
protocol.
PE
show vpc role Displays information about the keepalive
status, keepalive parameters, role of the
MLAG switch, and the system MAC and
priority.
PE
show vpc statistics Displays counters for the keepalive messages
transmitted and received by the MLAG
switch
PE
system-mac Manually configures the MAC address for the
VPC domain.
MD
system-priority Manually configures the priority for the VPC
domain.
MD
vpc Configures a port-channel (LAG) as part of
the MLAG domain.
IC
vpc domain Enters into MLAG Configuration mode. GC
vpc peer-link Configures a port channel as the MLAG peer
link for a domain and enables the peer link
protocol.
IC
a. For the meaning of each Mode abbreviation, see Mode Types .
Command Description Mode
a