Administrator Guide

Layer 3 Routing Commands 1643
<cr> Press enter to execute the command.
| Output filter options.
summary Display the IPV6 multicast routing table summary.
console#show ipv6 mroute source 2001::5
Multicast Route Table
Expiry Up Time
Source IP Group IP (mm:ss) (hh:mm:ss) RPF Neighbor Flags
--------------- --------------- -------- ----------- --------------
2001::5 FF43::5 03:08 00:00:21 2001::5 SPT
console#show ipv6 mroute source 2001::5 summary
Multicast Route Table Summary
Source IP Group IP Protocol IIF OIF Expiry
--------------- --------------- -------- --------- --------- ------
2001::5 FF43::5 PIMSM Vl12 Vl11
Vl13
show ipv6 pim interface
Use the show ipv6 pim interface command to display interface config
parameters. If no interface is specified, all interfaces are displayed.
Syntax
show ipv6 pim interface [ vlan vlan-id ]
• vlan-id — A valid VLAN ID value.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
There are no user guidelines for this command.