Administrator Guide

Dell EMC Networking CLI 164
maximum-paths ibgp (BGP
Router Configuration)
Specifies the maximum number of next hops
BGP may include in an Equal Cost Multipath
(ECMP) route derived from paths received
from neighbors within the local autonomous
system.
BR
maximum-paths ibgp (IPv6
Address Family
Configuration)
Limits the number of ECMP next hops in IPv6
routes from internal peers.
IPAF
neighbor activate Enables the exchange of IPv6 routes with a
neighbor.
IPAF,
IPAF4
neighbor advertisement-
interval (BGP Router
Configuration)
Configures the minimum time that must elapse
between advertisements of the same route to a
given neighbor.
BR
neighbor advertisement-
interval (IPv6 Address
Family Configuration)
Controls the time between sending Update
messages containing IPv6 routes.
IPAF
neighbor allowas-in Configures BGP to accept prefixes even if the
local ASN is part of the AS_PATH.
BR
neighbor connect-retry-
interval
Configure the initial connection retry time for a
specific neighbor.
BR
neighbor default-originate
(BGP Router
Configuration)
Configures BGP to originate a default route to a
specific neighbor.
BR
neighbor default-originate
(IPv6 Address Family
Configuration)
Configures BGP to originate a default IPv6
route to a specific neighbor.
IPAF
neighbor description Records a text description of a neighbor. BR
neighbor ebgp-multihop Configures BGP to form neighborship with
external peers that are not directly connected.
BR,
IPAF
neighbor filter-list (BGP
Router Configuration)
Filters advertisements to or from a specific
neighbor according to the advertisement’s AS
Path.
BR
neighbor filter-list (IPv6
Address Family
Configuration)
Filters BGP to apply an AS path access list to
UPDATE messages received from or sent to a
specific neighbor.
IPAF
Command Description Mode
a