Administrator Guide

Switch Management Commands 1974
Command Mode
HiveAgent Server Configuration
User Guidelines
Passwords are always stored and displayed as encrypted, even if entered in
unencrypted format.
Example
console(config)#support-assist
console(conf-support-assist)#server 10.0.0.1
console(conf-support-assist-10.0.0.1)#proxy-ip-address 10.0.0.2 port 1025
username admin password 0 password
Command History
Introduced in version 6.3.0.1 firmware.
source-interface vlan-id
Use the source-interface vlan-id command to assign a source interface which
HiveAgent obtains the IP address used as the source IP address in packets
addressed to the HiveManager NG.
Syntax
source-interface vlan-id <vlan-id>
no source-interface vlan-id
• vlan-id— A VLAN from which the IP address may be derived. Range 1–
4093.
Default Configuration
By default, a source interface VLAN is not assigned.
Command Mode
HiveAgent Configuration mode