Administrator Guide

Switch Management Commands 2002
Example
console#show ip address-conflict
Address Conflict Detection Status...Conflict Detected
Last Conflicting IP Address.........10.131.12.56
Last Conflicting MAC Address........00:01:02:04:5A:BC
Time Since Conflict Detected........5 days 2 hrs 6 mins 46 secs
console#show ip address-conflict
Address Conflict Detection Status.............. No Conflict Detected
show ip helper-address
Use the show ip helper-address command to display IP helper addresses
configuration.
Syntax
show ip helper-address [vrf vrf-name][intf-address]
• vrf-name—The name of the VRF instance on which the command
operates. If no VRF parameter is given, information for the default
(global) router instance is shown.
• intf-address — IP address of a routing interface in dotted quad notation.
(Range: Any valid IP address)
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
Time Since Conflict
Detected
The time in days, hours, minutes, and seconds since the last
address conflict was detected.
Term Description