Administrator Guide

Dell EMC Networking CLI 201
Auto-Install
CLI Macro
Command Description Mode
a
a. For the meaning of each Mode abbreviation, see Mode Types .
boot auto-copy-sw Enables or disables Stack Firmware
Synchronization.
GC
boot auto-copy-sw allow-
downgrade
Enables downgrading the firmware version on
the stack member if the firmware version on the
manager is older than the firmware version on
the member.
GC
boot host auto-reboot Enables rebooting the device (no administrative
intervention) when the auto-image is
successfully downloaded.
GC
boot host auto-save Enables/disables automatically saving the
downloaded configuration on the switch.
GC
boot host dhcp Enables/disables Auto Config on the switch. GC
boot host retry-count Set the number of attempts to download a
configuration.
GC
show auto-copy-sw Displays Stack Firmware Synchronization
configuration status.
PE
show boot Displays the current status of the Auto Config
process.
PE
Command Description Mode
a
macro name Creates a user-defined macro. GC
macro global apply Use to apply a macro. GC
macro global trace Applies and traces a macro. GC
macro global description Appends a line to the global macro description. GC
macro apply Use to apply a macro. IC
macro trace Applies and traces a macro. IC
macro description Appends a line to the macro description. IC
show parser macro Displays information about defined macros. PE