Administrator Guide

Layer 2 Switching Commands 411
User Guidelines
Use the link debounce time command to configure the debounce time for an
interface.
Command History
Introduced in version 6.2.0.1 firmware.
Example
The following example shows the output for representative interfaces.
console#show interfaces debounce
Interface Debounce Time (ms) Flaps
--------- ------------------ -------
Gi1/0/1 500 0
show interfaces description
Use the show interfaces description command in User Exec mode to display
the description for all configured interfaces.
Syntax
show interfaces description [gigabitethernet unit/slot/port | port-channel
port-channel-number | tengigabitethernet unit/slot/port |
fortygigabitethernet unit/slot/port]
Default Configuration
This command has no default configuration.
Command Mode
User Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.