Administrator Guide

Layer 2 Switching Commands 460
Gi1/0/3 Enabled Active Enabled Disabled In-Active Enabled
Gi1/0/4 Enabled Active Enabled Disabled In-Active Enabled
Gi1/0/5 Enabled Active Enabled Disabled In-Active Enabled
Gi1/0/6 Enabled Active Enabled Disabled In-Active Enabled
Gi1/0/7 Enabled Active Enabled Disabled In-Active Enabled
Gi1/0/8 Enabled Active Enabled Disabled In-Active Enabled
show green-mode eee-lpi-history interface
Use the show green-mode eee-lpi-history interface command to display the
interface green-mode EEE LPI history.
Syntax
show green-mode eee-lpi-history interface interface-id
• interface-id —An Ethernet interface identifier. See Interface Naming
Conventions for interface representation.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec, Global Configuration mode and all Configuration submodes
User Guidelines
On combo ports, samples are only collected on the copper ports when
enabled.
The following fields are displayed by this command.
Term Description
Sampling Interval Interval at which EEE LPI statistics is collected.
Total No. of
Samples to Keep
Maximum number of samples to keep.
Percentage LPI
Time per Stack
Percentage of total time spent in LPI mode by all ports in the
stack when compared to total time since reset.
Sample No. Sample index.