Administrator Guide

Layer 2 Switching Commands 568
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
This command has no user guidelines.
Examples
This example show how the information is displayed when you use the
command with the all parameter.
console#show lldp interface all
Interface Link Transmit Receive Notify TLVs Mgmt
--------- ---- -------- -------- -------- ------- ----
Gi1/0/1 Up Enabled Enabled Enabled 0,1,2,3 Y
Gi1/0/2 Down Enabled Enabled Disabled Y
Gi1/0/3 Down Disabled Disabled Disabled 1,2 N
TLV Codes: 0 – Port Description, 1 – System Name, 2 – System Description, 3 –
System Capability
console# show lldp interface Gi1/0/1
Interface Link Transmit Receive Notify TLVs Mgmt
--------- ---- -------- -------- -------- ------- ----
Gi1/0/1 Up Enabled Enabled Enabled 0,1,2,3 Y
TLV Codes: 0 – Port Description, 1 – System Name, 2 – System Description, 3 –
System Capability
show lldp local-device
Use the show lldp local-device command to display the advertised LLDP
local data. This command can display summary information or detail for each
interface.
Syntax
show lldp local-device {detail interface | interface | all}
• detail — includes a detailed version of the local data.
• interface — Specifies a valid Ethernet interface on the device. Specify
either gigabitethernet unit/slot/port or tengigabitethernet unit/slot/port
or fortygigabitethernet unit/slot/port.
• all — Shows lldp local device information on all interfaces.