Users Guide

176 Hardware Overview

Dell EMC Networking N4000 Series Switch

Hardware

This section contains information about device characteristics and modular

hardware configurations for the Dell EMC Networking N4000 Series

switches.

Front Panel

The Dell EMC Networking N4000 Series front panel includes the following

features:

• Switch ports

• Module bay that supports the following modules:

– 2 x 40 Gig QSFP (each QSFP may be configured as 4 x 10 Gig ports)

– 4 x SFP+ module

– 4 x 10GBASE-T module

See "Hot-Pluggable Interface Modules" on page 178 for more information.

• USB port

• Reset button

• Port and system LEDs

• Stack LED

The Dell EMC Networking N4032 front panel provides 24 x 10GbE copper

ports that support up to 100M of CAT-6A UTP cabling. The Dell EMC

Networking N4032F provides 24 SFP+ ports supporting SFP+ and SFP

transceivers.

NOTE: Both the Dell EMC Networking PC8100 and N4000 Series switches can

run firmware versions 6.0.0.8 and beyond. The Dell EMC Networking N4000 Seri

switches cannot run firmware prior to version 6.0.0.8.