Users Guide

214 Setting Basic Network Information
Default Network Information
By default, no network information is configured. The DHCP client is
enabled on the OOB interface by default on Dell EMC Networking N3000,
N3100-ON, and N4000 Series switches. The DHCP client is enabled on
VLAN 1 by default on the Dell EMC Networking, N1100-ON, N1500, N2000,
and N2100-ON Series switches. DNS is enabled, but no DNS servers are
configured. VLAN 1 does not have an IP address, subnet mask, or default
gateway configured on Dell EMC Networking N3000, N3100-ON, and N4000
Series switches.
NOTE: Dell EMC Networking, N1100-ON, N1500, N2000, and N2100-ON Series
switches do not have an out-of-band interface.