Users Guide

Authentication, Authorization, and Accounting 345
Configuring IEEE 802.1X (Web)
This section provides information about the OpenManage Switch
Administrator pages for configuring and monitoring the IEEE 802.1X
features and Port Security on Dell EMC Networking N1100-ON, N1500,
N2000, N2100-ON, N3000, N3100-ON, and N4000 Series switches. For
details about the fields on a page, click at the top of the Dell EMC
OpenManage Switch Administrator web page.
Dot1x Authentication
Use the Dot1x Authentication page to configure the 802.1X administrative
mode on the switch and to configure general 802.1X parameters for a port.
To display the Dot1x Authentication page, click Switching  Network
Security  Dot1x Authentication  Authentication in the navigation panel.
Maximum number of supplicants per port
for MAC-based authentication mode
64 (32 for N1100-ON and N1500 Series
switches)
Guest VLAN Disabled
Unauthenticated VLAN Disabled
Dynamic VLAN creation Disabled
RADIUS-assigned VLANs Disabled
IAS users none configured
Port security Unlocked
Port security traps Enabled
Maximum learned MAC addresses 100 (when locked)
Monitor mode Disabled
Table 10-12. Default Port-Based Security Values
Feature Description