Users Guide

Security Commands 1008
Syntax
attribute { 30 | 31 | 32 } mac format { ietf | unformatted | legacy } [lower-
case | upper-case]
no attribute { 30 | 31 | 32 } mac format
• ietf—Format the MAC address as 18-DB-F2-25-B2-D4. The default is
upper case.
• unformatted—Format the MAC address as 18dbf225b2d4. The default is
lower case.
• legacy—Format the MAC address as 18:db:f2:25:b2:d4. The default is
lower case.
• lower-case—Format hexadecimal characters using the character set [0-9a-
f].
• upper-case—Format hexadecimal characters using the character set [0-9A-
F].
Default Configuration
By default, the switch sends the Original-Called-Number (30), Calling-
Station-Id (31), and NAS-Identifier (32) attribute MAC address in
unformatted upper-case.
Command Mode
RADIUS Server Configuration
User Guidelines
Use this command to override the format of MAC addresses sent in the
Original-Called-Number (30), Calling-Station-Id (31), or NAS-Identifier (32)
attributes for a RADIUS server.
This command is only supported for 802.1X or MAB authentication . Local
authentication formats remain unchanged.
The Calling-Station-Id attribute is sent when authenticating using
authentication host mode single-host, multi-auth, multi-domain or when
using MAB authentication for an interface.