Users Guide

Security Commands 1018
msgauth
Use the msgauth command to enable the message authenticator attribute to
be used for the RADIUS Authenticating server being configured. Use the
“no” form of this command to disable the message authenticator attribute.
Syntax
msgauth
no msgauth
Default Configuration
The message authenticator attribute is enabled by default.
Command Mode
RADIUS Server Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(config-auth-radius)#msgauth
name (RADIUS Server)
Use the name command to assign a RADIUS server to a group. Use the no
form of the command to return the name to the default (Default-RADIUS-
Server). The no form of the command does not require the user to enter the
configured name.
Syntax
name groupname
no name
• groupname—The name of the group for a RADIUS server (Range: 1 to 32
characters).