Users Guide

Security Commands 1080
clear dot1x statistics
Use the clear dot1x statistics command to clear the statistics for a specified
interface or all interfaces.
Syntax
clear dot1x statistics [interface ID]
• interface ID—An Ethernet (physical) interface identifier.
Default Configuration
This command has no default configuration
Command Mode
Privileged Exec mode
User Guidelines
This command clears all 802.1X statistics for an interface or for all interfaces
on the switch.
Command History
Command introduced in version 6.6 firmware.
dot1x system-auth-control
Use the dot1x system-auth-control command in Global Configuration mode
to enable 802.1x globally. To disable 802.1x globally, use the no form of this
command.
Syntax
dot1x system-auth-control
no dot1x system-auth-control
Default Configuration
The default for this command is disabled.