Users Guide

Layer 3 Routing Commands 1258
Command History
Introduced in version 6.2.0.1 firmware.
Example
console(config-router)# bgp fast-external-fallover
bgp fast-internal-fallover
Use the bgp fast-internal-fallover command to configure BGP to
immediately reset the adjacency with an internal peer when there is a loss of
reachability to an internal peer.
Syntax
bgp fast-internal-fallover
no bgp fast-internal-fallover
Default Configuration
By default, fast internal fallover is enabled.
Command Mode
BGP Router Configuration mode
User Guidelines
BGP tracks the reachability of each internal peer’s IP address. If a peer
becomes unreachable (that is, the RIB no longer has a non-default route to
the peer’s IP address), BGP drops the adjacency.
Command History
Introduced in version 6.2.0.1 firmware.
Example
console(config-router)# bgp fast-internal-fallover