Users Guide

Layer 3 Routing Commands 1365
Modified in version 6.3.0.1 firmware.
Example
console # show bgp ipv6 statistics
Delta T Phase Upd Grp GenId Reason Peer Duration Adds Mods
Dels
29:33:49 3 0 2041 Fwd status chng 34 750 0 500
29:33:40 2 2042 Accept-RIB-In- 59 750 0 500
29:33:28 2 2043 Accept-RIB-In- 10 0 0 250
29:23:40 2 2044 Accept-RIB-In- 32 0 0 1000
29:13:40 3 1 2044 Phase 2 done 48 500 2500 1750
29:02:01 3 0 2044 Phase 2 done 41 750 0 1250
28:33:40 2 2045 Phase 1 done 32 500 0 0
28:14:40 2 2046 Phase 1 done 16 250 0 0
show bgp ipv6 summary
Use this command to display a summary of BGP configuration and status.
This command deprecates and replaces the show ipv6 bgp summary
command.
Syntax
show bgp ipv6 summary
Default Configuration
There is no default configuration for this command.
Command Mode
User Exec mode, Privileged Exec mode, Global Configuration mode and all
Configuration submodes.
User Guidelines
The following fields are displayed.
Field Description
Admin Mode Whether BGP is globally enabled.
BGP Router ID The configured router ID.
Local AS Number The router’s AS number.