Users Guide

Layer 3 Routing Commands 1591
• preferences—Display the routing preferences.
• static—Show static routes only.
• summary—Show a summary of the route types.
• vlan vlan-id—A VLAN identifier.
• loopback loopback-id—A loopback identifier.
• tunnel tunnel-id—A tunnel identifier.
Default Configuration
This command has no default configuration.
Command Mode
User Exec, Privileged Exec modes, Global Configuration mode and all
Configuration submodes
User Guidelines
The output of the command also displays the IPv6 address of the default
gateway and the default route associated with the gateway.
Use the track-table argument to display the IPv6 routes being tracked.
Command History
Command updated in version 6.6 firmware.
Example
The following example displays the IPv6 address of the default gateway and
the default route associated with the gateway.
console(config)#show ipv6 route
IPv6 Routing Table - 0 entries
Route Codes: C - connected, S - static
O - OSPF Intra, OI - OSPF Inter, OE1 - OSPF Ext 1, OE2 - OSPF Ext 2
ON1 - OSPF NSSA Ext Type 1, ON2 - OSPF NSSA Ext Type 2
Default gateway is 10.1.20.1
S 0.0.0.0/0 [254/0] via 10.1.20.1
C 10.1.20.0/24 [0/1] directly connected, vlan2
C 20.1.20.0/24 [0/1] directly connected, vlan4