Users Guide

Layer 3 Routing Commands 1897
console#clear vrrp statistics
show vrrp statistics
This command displays statistics for a selected Virtual Router Redundancy
Protocol version 3 (VRRPv3) group or displays the global statistics.
Syntax
show vrrp statistics [{ipv4| ipv6} vlan vlan-id vr-id]
• ipv4—(Optional) Indicates the Virtual router group belongs to an IPv4
address family.
• ipv6—(Optional) Indicates the Virtual router group belongs to an IPv6
address family.
• vlan vlan-id—(Optional) Indicates the VLAN number to which the Virtual
router belongs.
• vr-id—(Optional) Virtual router group number. The range is from 1 to 255.
Default Configuration
This command has no default configuration.
Command Mode
User Exec, Privileged Exec mode, Global Configuration mode and all
Configuration submodes
User Guidelines
If the show vrrp statistics command is issued without the optional arguments,
then the global statistics are displayed.
If the optional arguments are specified, the statistics are displayed for the
virtual router corresponding to the given (IP address family, interface and VR-
ID) combination.
Command History
Command introduced in version 6.6 firmware.