Users Guide

Switch Management Commands 1931
sntp unicast client enable
Use the sntp unicast client enable command in Global Configuration mode
to enable a client to use Simple Network Time Protocol (SNTP) predefined
Unicast clients. To disable an SNTP Unicast client, use the no form of this
command.
Syntax
sntp unicast client enable
no sntp unicast client enable
Default Configuration
The SNTP Unicast client is disabled.
Command Mode
Global Configuration mode
User Guidelines
Use the sntp server command to define SNTP servers.
Examples
The following example enables the device to use Simple Network Time
Protocol (SNTP) to request and accept SNTP traffic from servers.
console(config)# sntp unicast client enable
clock set
Use the clock set command to manually set the system time.
Syntax
clock set {<hh:mm:ss> | <mm/dd/yyyy>}
Default Configuration
The system time is local.