Users Guide

Switch Management Commands 2125
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged Exec mode
User Guidelines
Debug messages are sent to the system log at the DEBUG severity level. To
display them on the console, enable console logging at the DEBUG level
(logging console debug).
Command History
Command introduced in version 6.6.0 firmware.
debug ip dvmrp
Use the debug ip dvmrp to trace DVMRP packet reception and transmission.
The receive option traces only received DVMRP packets and the transmit
option traces only transmitted DVMRP packets. When neither keyword is
used in the command, all DVMRP packet traces are dumped. Vital
information such as source address, destination address, control packet type,
packet length, and the interface on which the packet is received or
transmitted is displayed on the console.
Syntax
debug ip dvmrp packet [receive | transmit]
no debug ip dvmrp packet [receive | transmit]
Default Configuration
Display of DVMRP traces is disabled by default.
Command Mode
Privileged Exec mode.