Users Guide

Switch Management Commands 2129
Default Configuration
Display of PIMSM traces is disabled by default.
Command Mode
Privileged Exec mode.
User Guidelines
Debug output should be enabled with caution. Switch behavior may be
adversely affected by the additional processing load incurred from enabling
debug.
Example
console#debug ip pimsm packet
debug ip vrrp
To enable debug tracing of VRRP events, use the debug ip vrrp command in
Privileged Exec mode. To disable debug tracing, use the no form of the
command.
Syntax
debug ip vrrp
no debug ip vrrp
Default Configuration
No debug tracing is enabled by default.
Command Mode
Privileged Exec mode
User Guidelines
Debug messages are sent to the system log at the DEBUG severity level. To
print them on the console, enable console logging at the DEBUG level
(logging console debug).