Users Guide

Switch Management Commands 2156
Protocol....................................... none
Switch-chip-register........................... False
Compression mode............................... TRUE
Stack IP Address Protocol...................... dhcp
Stack IP Address:
IP Address Net Mask Gateway Assigned Unit
--------------- --------------- --------------- ---------------
show supported mibs
Use the show supported mibs command to display the implemented SNMP
MIBs.
Syntax
show supported mibs
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
There are no user guidelines for this command.
Command History
Introduced in version 6.3.0.1 firmware.
Example
console#show supported mibs
MIBs Supported:
RFC 1907 - SNMPv2-MIB The MIB module for SNMPv2 entities
RFC 2819 - RMON-MIB Remote Network Monitoring Management
Information Base
HC-RMON-MIB The original version of this MIB,
published as RFC3273.
HC-ALARM-MIB Initial version of the High Capacity Alarm