Users Guide

Layer 2 Switching Commands 299
User Guidelines
The hit counter applies to the ACL, not to the interface. It shows the sum of
all matching packets across all interfaces to which the ACL is applied. For an
ACL applied to multiple interfaces, the hit counter will be identical for all
interfaces.
Command History
Updated in 6.3.0.1 firmware. Updated User Guidelines in 6.3.0.5 firmware.
Example
console#show mac access-lists
Current number of all ACLs: 9 Maximum number of all ACLs: 100
MAC ACL Name Rules Count Interface(s) Direction
--------------- ----- ---------- ------------------------- ---------
DELL123 1 0 Gi1/0/1 Inbound
ipv4-multicast 2 14666 Po1-64,Gi1/0/1-24, Inbound
console#show mac access-lists mac-acl
MAC ACL Name: mac-acl
Outbound Interface(s):
Gi1/0/8
Rule Number: 1
Action......................................... permit
Source MAC Address............................. 0000.1122.3344
Source MAC Mask................................ FFFF.0000.0000
EtherType...................................... ipx
VLAN........................................... 100
ACL Hit Count.................................. 213
Rule Number: 2
Action......................................... permit
Source MAC Address............................. 0000.1133.2244
Source MAC Mask................................ FFFF.0000.0000
EtherType...................................... ip
VLAN........................................... 100
ACL Hit Count.................................. 213