Users Guide

Layer 2 Switching Commands 361
Command Mode
Privileged Exec, Global Configuration mode and all Configuration submodes
User Guidelines
There are no user guidelines for this command.
Example
console#show ip dhcp snooping interfaces
Interface Trust State Rate Limit Burst Interval
(pps) (seconds)
---------- ------------- ------------- ---------------
Gi1/0/1 No 15 1
Gi1/0/2 No 15 1
Gi1/0/3 No 15 1
console#show ip dhcp snooping interfaces gigabitethernet 1/0/15
Interface Trust State Rate Limit Burst Interval
(pps) (seconds)
---------- ------------- ------------- ---------------
Gi1/0/15 Yes 15 1
show ip dhcp snooping statistics
Use the show ip dhcp snooping statistics command to display the DHCP
snooping filtration statistics.
Syntax
show ip dhcp snooping statistics
Default Configuration
There is no default configuration for this command.
Command Mode
User Exec, Privileged Exec, Global Configuration mode and all Configuration
submodes