Users Guide

Layer 2 Switching Commands 426
Gi1/0/6 Po1 T (11)33-64 11,33-64
Po1 T (11)33-64 11,33-64
show statistics
Use the show statistics command to display detailed statistics for a specific
port or for the internal CPU interface.
Syntax
show statistics {gigabitethernet unit/slot/port |switchport | port-channel
port-channel-number | tengigabitethernet unit/slot/port |
fortygigabitethernet unit/slot/port}
• unit/slot/port— A valid Ethernet interface identifier. See Interface
Naming Conventions for interface representation.
• port-channel-number— A port channel identifier.
• switchport—Displays statistics for the internal switch CPU interface.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
Statistics are only collected for Ethernet interfaces, port-channel interfaces,
and the switch CPU interface.
Command History
Modified in version 6.5 firmware. Command output updated in version 6.6
firmware.
Examples
The following example shows statistics for port gi1/0/1.
console#show statistics gi1/0/1
Total Frames Received (Octets)................ 0