Users Guide

Layer 2 Switching Commands 863
Interface EtherType Secondary TPIDs
--------- --------- ---------------
Gi1/0/1 802.1
console(config-vlan10)#show switchport ethertype interface all
console(config)#show switchport ethertype interface gi1/0/1
Interface EtherType Secondary TPIDs
--------- --------- ---------------
Gi1/0/1 802.1
Gi1/0/2 802.1 VMAN
Gi1/0/3 802.1
Gi1/0/4 802.1
Gi1/0/5 802.1
show vlan
Use the show vlan command to display detailed information, including
interface information and dynamic VLAN type, for a specific VLAN or
RSPAN VLAN. The ID is a valid VLAN identification number.
Syntax
show vlan [id vlan-id | name vlan-name ]
• vlan-id—A VLAN identifier
• vlan-name—A valid VLAN name (Range 1-32 characters)
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
• VLAN—The VLAN identifier
• Name—The VLAN name