Users Guide

Layer 2 Switching Commands 894
traffic to a queue and also remarks the CoS or DSCP values in the voice
traffic. See the User Configuration Guide for more information. Voice VLAN
is recommended for enterprise-wide deployment of voice services on the IP
network.
switchport voice vlan
This command is used to enable the voice VLAN capability on the switch.
Syntax
switchport voice vlan
no switchport voice vlan
Command Mode
Global Configuration
User Guidelines
Voice VLAN must be configured on access or general mode ports. It is not
supported on trunk mode ports.
Command History
Syntax updated in version 6.5 firmware.
Default Value
This feature is disabled by default.
Example
console(config)#switchport voice vlan
console(config)#no switchport voice vlan
switchport voice vlan (Interface)
This command is used to assign the voice VLAN ID on the interface.