Manualshelf

Users Guide

ManualsBrandsDell ManualsAccess PlatformsEMC PowerSwitch N3100 Series
1131113211331134113511361137113811391140
Table Of Contents
1132 DHCP Server Settings
Figure 30-5. Address Pool
Adding a Network Pool
To create and configure a network pool:
1
Open the
Address Pool
page.
2
Click Add Network Pool to display the Add Network Pool page.
3
Assign a name to the pool and complete the desired fields.
In Figure 30-6, the network pool name is Engineering, and the address
pool contains all IP addresses in the 192.168.5.0 subnet, which means a
client that receives an address from the DHCP server might lease an
address in the range of 192.168.5.1 to 192.168.5.254.