Users Guide

Authentication, Authorization, and Accounting 333
5 To re-authenticate immediately, check Re-authenticate Now for all ports
to be re-authenticated.
6 Click Apply.
The authentication process is restarted on the specified ports (either
immediately or periodically).
To change the administrative port control:
1 Open the Dot1x Authentication page.
2 Click Show All.
The Dot1x Authentication Table displays.
3 Scroll to the right side of the table and select the Edit check box for each
port to configure. Change Admin Interface Control to Authorized,
Unauthorized, or Automode as needed for chosen ports. Only Automode
actually uses 802.1X to authenticate. Authorized and Unauthorized are
manual overrides.
4 Click Apply.
Admin Port Control is updated for the specified ports, and the device is
updated.
Authenticated Users
The Authenticated Users page is used to display lists of ports that have
authenticated users.
To display the Authenticated Users page, click Switching  Network
Security  Authenticated Users in the navigation panel.
Figure 9-6. Network Security Authenticated Users