Users Guide

Monitoring and Logging System Information 429
2 Configure the username and password that the switch must use to
authenticate with the mail server.
console(Mail-Server)#username switchN3048
console(Mail-Server)#password passwordN3048
console(Mail-Server)#exit
3 Configure emergencies and alerts to be sent immediately, and all other
messages to be sent in a single email every 120 minutes.
console(config)#logging email error
console(config)#logging email urgent emergency
console(config)#logging email logtime 120
4 Specify the email address of the sender (the switch).
console(config)#logging email from-addr [e-mail]
5 Specify the address where email alerts should be sent.
console(config)#logging email message-type both to-addr
[e-mail]
6 Specify the text that will appear in the email alert Subject line.
console(config)#logging email message-type urgent subject "LOG
MESSAGES - EMERGENCY"
console(config)#logging email message-type non-urgent subject
"LOG MESSAGES"
7 Enable email logging and verify the configuration.
console(config)#logging email
console(config)#show mail-server all
Mail Servers Configuration:
No of mail servers configured.................. 1
Email Alert Mail Server Address................ 192.168.2.34
Email Alert Mail Server Port................... 25
Email Alert SecurityProtocol................... none
Email Alert Username........................... switchN3048
Email Alert Password........................... passwordN3048
console(config)#show logging email config
Email Alert Logging............................ enabled
Email Alert From Address.......................
[e-mail]
Email Alert Urgent Severity Level.............. 0