Users Guide

Table Of Contents

Images and File Management 529

Managing Images and Files (CLI)

This section provides information about the commands you use to upload,

download, and copy files to and from the Dell EMC Networking N-Series

switches. For more information about these commands, see the Dell EMC

Networking N1100-ON, N1500, N2000, N2100-ON, N2200-ON, and N3100-

ON Series Switches CLI Reference Guide at www.dell.com/support. It also

describes the commands that control the Auto Configuration feature.

The examples in this section give some specific examples of source URLs for

copying remote files to the switch. The complete source URL syntax is:

The complete destination URL syntax for copying files from the switch to a

remote system is:

Not all combinations are available. For example,

copy tftp:1.2.3.4/asd scp:4.3.2.1/asd is a nonsensical command and is not

allowed.

NOTE: Upload, download, and copy functions use the copy command to send

and receive files from remote systems. The basic syntax for the command is copy

source destination.

url flash://filename |

tftp://{ipaddress|hostname}/filepath/filename

ftp://user@{ipaddress|hostname}/path/filename |

scp://user@{ipaddress|hostname}/path/filename |

sftp://user@{ipaddress|hostname}/path/filename |