Users Guide

SNMP 521
console(config)#snmp-server group group_snmpv3 v3 auth read
view_snmpv3 write view_snmpv3
3 Create the user admin, assign the user to the group, and specify the
authentication credentials.
console(config)#snmp-server user admin group_snmpv3 auth-md5
secretkey
4 Specify the IP address of the host where traps are to be sent. Packet
authentication using MD5-SHA is enabled for the traps.
console(config)#snmp-server v3-host 192.168.3.35 admin traps
auth
console(config)#exit
5 View the current SNMP configuration on the switch. The output includes
the SNMPv1/2 configuration in the previous example.
console#show snmp
Community-String Community-Access View Name IP Address
-------------------- ---------------- --------- -------
private Read/Write Default All
public Read Only Default All
Traps are enabled.
Authentication trap is enabled.
Version 1,2 notifications
Community-
String
Community-
Access
View Name IP Address IP Mask
---------- ---------- ------------------------ ----------
private DefaultWrite All
public DefaultRead All
Community-String Group Name IP Address
----------------- -------------- ------------
private DefaultWrite All
public DefaultRead All
Target Addr. Type Community Version UDP
Port
Filter
Name
TO
Sec
Retries
------------ ---- --------- ---- ----- ----- --- -------
192.168.3.65 Trap public 1 162