Administrator Guide

Dell EMC Networking CLI 131
random-detect queue-
parms
Configures the green, yellow and red TCP and
non-TCP packet minimum and maximum
thresholds and corresponding drop
probabilities on an interface or all interfaces.
GC, IC,
or IR
random-detect exponential-
weighting-constant
Configures the decay in the calculation of the
average queue size user for WRED on an
interface or all interfaces.
GC, IC,
or IR
redirect Specifies that all incoming packets for the
associated traffic stream are redirected to a
specific egress interface (Ethernet port or port-
channel).
PCMC
service-policy Attaches a policy to an interface in a particular
direction.
GC or
IC
show class-map Displays all configuration information for the
specified class.
PE
show classofservice dot1p-
mapping
Displays the current 802.1p priority mapping
to internal traffic classes for a specific interface.
PE
show classofservice ip-dscp-
mapping
Displays the current IP DSCP mapping to
internal traffic classes for a specific interface.
PE
show classofservice trust Displays the current trust mode setting for a
specific interface.
PE
show diffserv Displays the DiffServ General Status
information.
PE
show diffserv service
interface
Displays policy service information for the
specified interface and direction.
PE
show diffserv service brief Displays all interfaces in the system to which a
DiffServ policy has been attached.
PE
show interfaces cos-queue Displays the class-of-service queue
configuration for the specified interface.
PE
show interfaces random-
detect
Displays the WRED policy on an interface. PE
show policy-map Displays all configuration information for the
specified policy.
PE
Command Description Mode
a