Administrator Guide

Dell EMC Networking CLI 158
OpenFlow
show lldp dcbx Displays the Traffic Class to Traffic Class Group
mapping.
PE
classofservice traffic-class-
group
Maps the internal Traffic Class to an internal
Traffic Class Group (TCG).
GC or
IC
traffic-class-group max-
bandwidth
Specifies the maximum transmission
bandwidth limit for each TCG as a percentage
of the interface rate.
GC or
IC
traffic-class-group min-
bandwidth
Specifies the minimum transmission bandwidth
guaranteed for each TCG before processing
frames from other TCGs on an interface.
GC or
IC
traffic-class-group strict Activates the strict priority scheduler mode for
each specified TCG.
GC or
IC
traffic-class-group weight Specifies the scheduling weight for each TCG. GC or
IC
show classofservice traffic-
class-group
Displays the Traffic Class to Traffic Class Group
mapping.
PE
show interfaces traffic Displays traffic information. PE
show interfaces traffic-class-
group
Displays the Traffic Class to Traffic Class Group
mapping.
PE
a. For the meaning of each Mode abbreviation, see Mode Types .
Command Description Mode
a
controller Configures a connection to an OpenFlow
controller
OFC
hardware profile openflow Selects the forwarding mode for the OpenFlow
hybrid capability.
GC
ipv4 address Assigns the IPv4 source address utilized for
controller connections.
OFC
mode Configures the selection of interfaces used to
assign the IP address utilized for controller
connections.
OFC
Command Description Mode
a