Administrator Guide

Layer 3 Routing Commands 1838
• vrid — Virtual router identification. (Range: 1-255)
Default Configuration
The default configuration is disabled.
Command Mode
Interface Configuration (VLAN) mode.
User Guidelines
The VRRP IP address is not pingable from within the switch.
vrrp authentication
Use the vrrp authentication command in Interface Configuration mode to
set the authentication details value for the virtual router configured on a
specified interface. Use the no form of the command to return the
authentication type to the default value.
Syntax
vrrp group authentication {none | simple key}
no vrrp group authentication
• group—The virtual router identifier. (Range: 1-255)
• none—Indicates authentication type is none.
• simple—Authentication type is a simple text password.
• key—The key for simple authentication. (Range: String values)
Default Configuration
None is the default configuration.
Command Mode
Interface Configuration (VLAN) mode.
User Guidelines
This command has no user guidelines.